For Missouri business owners and facility managers, maintaining the exterior of a metal building is a constant battle against the elements. Traditional paint on commercial metal structures often chalks, fades, and peels within just a few years, leading to frequent maintenance costs and downtime.
METAL BUILDING PAINTING & COATINGS IN ST. LOUIS
Metal Building Painting & Coatings in Missouri and Illinois
Metal buildings and roofs made of aluminum and steel are designed to be durable. However, weather and elements can take a toll on metal surfaces such as rusting, warpage, and loose panels. This can cause pitting in the metal, roof, and building leaks and even holes rusting through the surface.
Proper care of your metal building and metal roof will ensure these conditions do not happen. Rhino Shield exterior paint coating completely bonds to and seals metal surfaces and metal roof exterior homes and metal commercial buildings.
With a large variety of colors to choose from, you can’t go wrong with Rhino Shield’s metal building exterior paint!
Industrial & Commercial Metal Coating Solutions
Rhino Shield of Missouri offers a commercial-grade solution that goes beyond aesthetics. Our ceramic coating system is ideal for warehouses, retail centers, and industrial complexes. It provides a high-build protective layer that resists chemical exposure, salt air, and heavy UV radiation. By choosing Rhino Shield for your commercial property, you are investing in a 25-year solution that significantly lowers your long-term maintenance overhead and keeps your business looking professional year-round.
Warehouse & Industrial Building Painting
Warehouse walls take a beating. Dock areas get scuffed by trucks and forklifts, and long west-facing walls bake in the afternoon sun until the factory finish turns chalky and uneven. Rhino Shield goes on 8 to 10 times thicker than standard paint, so lower panels and high-traffic areas hold up better, and the color stays consistent from one end of the building to the other. If your warehouse or distribution building looks tired from the highway, a recoat is the fastest way to make it look like a well-run operation again.
Steel & Pre-Engineered Metal Buildings
Pre-engineered steel buildings are all over the St. Louis area: contractor shops in St. Charles County, offices and showrooms along I-44 and I-70, church fellowship halls and storage buildings. The factory finish on these panels fades and chalks with age, and the trouble usually starts at fasteners and panel laps. Our crews clean, repair and caulk those details before the elastomeric ceramic coating goes on, so the whole building envelope gets sealed, not just the flat panels.
Pole Barns, Shops & Farm Buildings
Get outside the metro and a lot of the metal we coat is on pole barns, equipment sheds and farm shops. A few are in the project photos below, including Stone Hill Winery in Hermann. Coating the panels you already have means no tear-off and no dumpster full of old siding, and the walls are backed by our 25-year written warranty. We cover a 150-mile radius of St. Louis in Missouri and Illinois.
Residential Metal Siding & Roofing Coating Protection
Whether you have a modern home with metal accents or a classic residence with metal siding or a tin roof, protecting that substrate is vital to your home's longevity. Metal surfaces are prone to thermal expansion and contraction, which causes standard latex paint to crack and flake off.
Request an Estimate
Our residential application process ensures that your metal surfaces remain vibrant and rust-free. As DJ from Webster Groves noted about their 124-year-old home, our crews bring a level of professionalism and care to every project. For residential metal, we focus on:
- Color Retention: Ensuring your home’s "colors pop" and stay fresh despite the intense Missouri sun.
- Thermal Insulation: The ceramic microspheres in our coating help reflect solar rays, potentially lowering your cooling costs.
- Noise Reduction: The thick, multi-layered Rhino Shield system can even help dampen the sound of rain on metal roofing.
The Rhino Shield "System" for Metal Exteriors & Painting Metal Exterior
Applying a coating to metal is fundamentally different than wood or stucco. At Rhino Shield of Missouri, we don't just "paint"—we implement a rigorous multi-step system specifically engineered for metal substrates.
Why the System Matters for Metal:
- Corrosion Inhibition: We utilize specialized primers that contain rust inhibitors to stop oxidation in its tracks. This is critical for older metal buildings that may already show signs of "flash rust."
- Mechanical Bonding: Metal is non-porous. Our preparation process involves professional-grade cleaning and etching to ensure the coating creates a permanent mechanical bond with the surface.
- Elasticity & Tension: Metal expands significantly when hot. The Rhino Shield system is designed with high elasticity, allowing the coating to "stretch" with the metal without cracking or losing adhesion.
- Ceramic Shielding: Unlike paint, which is mostly water and cheap fillers, our system utilizes ceramic solids. This creates a hard, durable surface that resists impact and abrasion better than any traditional paint on the market.
By treating your metal building with the full Rhino Shield system, you aren't just changing the color; you are encasing your structure in a protective envelope that is guaranteed to last.
Request an estimate today!

Metal Building Painting FAQs
Can you paint a metal building with Rhino Shield?
Yes. Rhino Shield of Missouri coats steel and aluminum buildings, metal siding and metal roofs on both homes and commercial properties. Metal isn't porous, so prep is everything: the surface gets cleaned and etched first so the coating forms a permanent mechanical bond instead of just sitting on top.
How much does metal building painting cost?
It depends on the building's square footage, wall height, how much prep the panels need, and whether you're coating the walls, the roof or both. A coating that lasts decades often costs less over time than repainting every 5 to 7 years, so it's worth comparing against two or three repaint cycles. To get a real number for your building, request an estimate or call (314) 239-7947.
Can you paint over rusted metal siding?
Surface rust is common on older metal buildings, and it doesn't rule out a coating. Loose rust and failing paint come off during prep so the coating bonds to sound metal. Panels that have rusted through need to be repaired or replaced first, and we'll point those out when we look at the building.
Can the coating handle metal's thermal expansion?
Yes. Metal expands a lot when it heats up, and the Rhino Shield system is built with high elasticity so it stretches with the panels instead of cracking. That flexibility is why it keeps its bond through hot Missouri summers and cold winters, where rigid paint films tend to split and peel.
Do commercial exterior painters in St. Louis coat metal warehouses?
Yes. Rhino Shield of Missouri is a commercial exterior painting contractor that coats metal warehouses, retail centers and industrial buildings around St. Louis and Metro East Illinois. The ceramic coating resists chemical exposure and heavy UV, which cuts long-term maintenance costs and keeps the property looking professional.
Do you paint pole barns and farm buildings?
Yes. We coat pole barns, equipment sheds, farm shops and winery buildings anywhere within 150 miles of St. Louis. Faded or chalky metal siding gets its color back, and you keep the panels you have instead of re-skinning the building.
Does a ceramic coating help keep a metal building cooler?
It can. Ceramic microspheres in the Rhino Shield coating reflect the sun's rays, which may lower cooling costs in a metal home or building. On metal roofs, the thick, multi-layer system can also help dampen the sound of rain, which homeowners tend to notice right away.
What process do exterior painters use to coat metal siding?
Rhino Shield of Missouri uses a multi-step system on metal: inspection, power washing, cleaning and etching, repairs, caulking and priming, then the ceramic coating in multiple coats. Each step is about adhesion, because metal gives paint nothing to soak into.
How long does Rhino Shield last on metal siding?
Rhino Shield's wall coating on metal buildings comes with a 25-year written, transferable warranty. Its ceramic solids create a hard surface that resists impact and abrasion, so owners can stop repainting every 5 to 7 years. Roof coatings carry a different warranty, so ask about roof coverage when you request an estimate.





